Language: EN
Start free

From a mannequin to a model wearing the garment.

Many shops already photograph their stock on a mannequin or a dress form. Herofab takes that photo as the source and dresses a studio model in the same garment, so the listing shows a person where the form stood.

Worth knowing

What a mannequin photo gives, and what it leaves open.

  1. 1

    A garment already in shape

    On a mannequin the shoulders are filled, the front is closed and the hem hangs at its real length. Herofab is briefed to keep the fabric, shape, colours, buttons, print and logos it sees there, which is why the whole garment has to be visible and facing the camera.

  2. 2

    Pins and clips at the back

    Shop forms are often narrower than the garment, so the back gets pinned or clipped. Pulled fabric changes the outline shown in the photo. Photograph the piece unpinned where possible, and compare the width of the body and the sleeves with the real garment before publishing.

  3. 3

    A person in place of the form

    The model is ready-made, created in the app, or a person whose photo the seller has permission to use, in sizes from XS to XXL. The fit follows the size chosen and is not a measurement of how the garment sits on a real body.

Source photo

Photographing a dressed mannequin as the source.

  • Dress the mannequin fully: close buttons and zips, straighten the collar, and let the sleeves hang free at the sides instead of tucking them behind the form.
  • Stand directly in front at chest height and keep the phone upright, with the whole garment and a margin around it inside the frame.
  • Use a plain wall behind the mannequin and even light from the front; a window behind the form turns the garment into a silhouette and hides the fabric.

Photographing clothes on a mannequin: distance and lens

A mannequin photo distorts easily. With the phone close and its wide lens, the top of a garment looks larger than the hem; held too high, the shoulders swell and the legs shrink. Step back two or three paces and zoom in a little, so that the garment fills the frame from a distance and keeps its real proportions. For trousers and skirts, lower the phone to hip height.

Turn the mannequin rather than the camera for each view, so that the light stays the same in the front, side and back photos. A tripod or a phone propped on a shelf keeps the height constant across a whole rail of garments. Clean the form of dust and lint first, and remove price tags hanging from a sleeve, since both show up in a close photo of dark fabric.

Mannequin colour, sheer fabrics and the neck stand

The colour of the form matters for light and thin garments. A dark mannequin shows through a white T-shirt, a chiffon blouse or a linen shirt, and that shadow becomes part of the garment in the photo. A white or skin-toned form under light fabric, and a dark form under dark fabric, keep the cloth reading as itself. Lined pieces are less affected, though a lining should not show at the hem.

Metal neck stands, shoulder caps and the base pole belong to the form, not to the garment. On the model image a person takes the place of the form, but a cap or a seam of the form pressed through thin fabric may be read as part of the garment. Choose a form without visible hardware under the cloth, or cover a cap with a layer in the colour of the form.

One mannequin shoot, three kinds of image

The same mannequin photo can serve more than one tool. Virtual try-on dresses a studio model in the garment, with the model, size, pose and background chosen. Ghost mannequin is briefed to remove any mannequin, hanger or person and to show the garment alone, as a hollow 3D shape or a flat lay; a hanger or flat-lay photo is its sounder source, because a form can hide parts of the garment.

Detail shot frames a close-up of the collar, a cuff, the fabric or a closure from the same photo, and it is briefed to show only what the source already shows. A mannequin photo that is sharp and evenly lit from shoulder to hem is therefore worth more than several hurried ones: each later image starts from what that one photo recorded.

Questions

Mannequin to model, answered.

Does the mannequin have to be edited out before upload?

No. The source is one item, fully visible and shot straight on, and a mannequin is one of the accepted ways to show it, next to a flat lay, a hanger or a worn photo. Herofab dresses a studio model in the garment from that photo.

Is a headless bust or a dress form enough?

For tops, dresses and jackets a torso form shows the garment, as long as its full length is on the form and inside the frame. Trousers and skirts need the whole piece visible as well; a part outside the frame or hidden in a fold cannot be added back faithfully.

How does this differ from a ghost mannequin image?

A ghost mannequin image shows the garment alone as a hollow 3D shape, with no person and no form in the frame. Mannequin to model puts the garment on a studio model. The ghost mannequin tool works from a hanger or flat-lay photo, and no mannequin is needed for that shoot.

Does the colour of the mannequin matter for the model image?

For thin and pale garments, yes. A dark form behind a white shirt or a sheer blouse shows through the fabric, and the tool sees that shade as part of the garment. Use a light form under light, thin fabric, or photograph the piece on a hanger, where nothing sits behind the cloth.

Can a back photo taken on the mannequin be added?

Yes. The front is required, and a back photo and a detail close-up can be added. Turn the mannequin round on the spot, keep the phone at the same height and distance, and photograph the back with the whole garment inside the frame, so that a back view can follow the garment's real back.

How should clothes on a mannequin be photographed for this tool?

With a phone, straight on, the whole garment inside the frame and nothing folded, pinned out of sight or tucked away, since a part hidden in a fold cannot be added back faithfully. Close buttons and zips the way the piece is worn. The front is required; a back photo and a detail close-up can be added after it.

Can the model be a different size or body type from the mannequin?

Yes. The size is chosen from XS to XXL, and a model created in the app can be slim, average, curvy or plus, so one mannequin photo can show the garment on several bodies. The fit follows the size chosen and is not a measurement of how the garment fits a real body.

How much does it cost?

5 credits per image, plus one credit for 4K. In US dollars that is $0.20 to $0.60 per image before tax, from the largest plan to the smallest credit pack. The cost is shown before you generate, and if a job fails the credits are returned. The 20 free credits at sign-up cover 4 images with this tool.

Examples by product
Get started

Your next collection, shot this week.

20 credits at sign-up, no card required. Images made with free credits carry a watermark. Herofab also removes the watermark from those images once credits are purchased.